Weasel Pro from Dream-Flight. This is the original Weasel Pro kit, all EPP and covered in UltraCoat. Stickers and lettering were cut out in vinyl on my plotter.

I built this one to fly at the 2009 WeaselFest in Goleta, California. This is an annual get together held by Weasel owners now for many years. My vacation and the 09' WeaselFest were in sync and I got to go meet the designer of the Weasel, Michael Richter, and tons of other great Weasel pilots. Traditionally this is held at the birthplace of  the Weasel, Ellwood Bluffs in Goleta.

The build on these planes is very simple and straight forward. I'm running HS-81MG servos (Metal Gear), and a 1100mAh 6v battery, which balanced out the plane almost perfectly, very little nose weight was needed to get the CG perfect. Its covered in UltraCoat iron on covering, Carbon Fiber, Pink and Green. The white elevons are lightweight white packing tape.

Here's a couple In-Flight pics...

Flying off the bluffs in Carpinteria, California after WeaselFest 2009

The Santa Barbara Islands in the distance.

And some shots from WeaselFest 2009